Computers have altered many professions; now it's dentistry's turn. Yes, frightened patients will still face the drill. But when it comes to designing and manufacturing a crown, implant,
bridge or dentures, computers are beginning to replace painstaking manual methods. The basic design of the typical crown - metal bonded with porcelain - dates from the 18th century. This is a sector ripe for reinvention.
Most patients probably have no idea how much individual labour goes into restoring even a single tooth: each piece is bespoke. Take a crown. Traditionally, once the tooth has been repared, the dentist pours gunk into two jaw-shaped trays into which the patient bites down to create impressions. These are sent off to a lab along with the dentist's instructions.
The die is cast
On arrival, dental stone is poured into the impressions and left to harden. A pin is placed at the tooth being worked on (the "die") and others in the underside of the stone model, and a base is then poured on to it. Once set, the model is cut with a split saw or fine diamond disc so that the die can be removed for working. The pins mean it can be put back in precisely the same place. The technician then uses the die to build up a wax pattern 0.4mm to 1mm thick, in the shape that will ultimately be cast in metal. "The first thing I had to do as an
apprentice," says Chris Everingham, the retiring founder of Creative Dental lab in London, "is wax tooth-carving, so I learned the anatomy."
The finished pattern, embellished with a prong, or "sprue", is placed into a metal casting ring, which is filled with material called "investment". Once that's hardened, heating the ring to 850C burns off the wax, leaving the pattern's empty shape behind. The ring is mounted in a spinning machine, and centrifugal force pushes molten metal into the empty space, recreating the wax pattern in metal. Knock away the investment, remove the sprue, and there's the basis, or "coping", for your crown.
From there, the crown is hand-painted with porcelain, first with an opaque layer to blot out the darkness of the metal, and then with successive layers of shades chosen to match the patient's own teeth. The finished crown is fired at 930C and sent back to the dentist for installation.
You hope. Anything destined for a patient's mouth must be precisely made to within 20 microns. Gaps attract saliva, which can wash out the cement holding the crown in place, turning the gap into a haven for bacteria and decay.
But even a lab that can afford lengthy finishing times - Everingham estimates his maximum output at 60 crowns a month - can't be perfect; impressions may have tiny bubbles or smears.
It is these imperfections that computer technology is beginning to address.
About 18 months ago, labs such as Creative and nearby Ken Poland, which supplies cosmetic dentistry to the Channel 4 TV show 10 Years Younger, began buying 3M's Lava system.
Poland's Steve Pope makes the traditional stone model, but then scans the model and creates the coping digitally using a virtual "wax knife" and automated software. When Pope, a former aircraft engineer, builds a bridge on screen, it looks as hard as working in wax; this profession is being reskilled, not deskilled.
The data file is sent to a milling centre, in this case, Poland's own. There, the Lava software takes the file and assigns it to a barcoded block of zirconia. Cured at 1,500C, it becomes a hard, strong material that can be tinted by soaking and to which porcelain will bond. Pope says it's better than metal: zirconia is bio-compatible and used in hip and knee replacements.
The block is placed in the milling machine, and the computer translates the data file into cuts to produce the actual coping. Then the coping is cured for more than 11 hours. From there, the porcelain is applied by hand. Pope is particularly impressed by the software's ability to calculate precisely how much extra to allow to compensate for shrinkage in the curing process - between 23% and 26%.
Magic wand
The next stage is eliminating the impressions. At the New York offices of Dr Steven Alper, an oral scanner reads the movements of a wand inside the patient's mouth. The wand captures 3D video of the patient's upper and lower jaw, as well as the outside bite pattern. "I can see if I need to fix something," says Alper. "For example, for a crown prep you have a margin around the tooth, and it's hard to see on the patient. You only have one or two views, and they're all white and small. On the screen you can look really close."
Turning the image to various angles on his touchscreen, Alper found a hole. He rescanned that section, filled out an onscreen prescription, and sent the file to the lab electronically.
Simultaneously, the data goes to a facility that uses it to generate the physical model in resin. The die is sectioned in manufacturing, eliminating the imprecision of saw cuts.
All of this eliminates time waiting for materials to harden, cure or cool. More importantly, everyone agrees the software does a better job of getting as tight a fit as possible. "It won't cure
everything," says David Coppen, chairman of the Harley Technician Study Club, which saw the scanner demonstrated in London last week, "but this is the future."
Resource: A new jewel in dentistry's crowns | Glasgow dental implants
Posts
